AUTOTRUCK CLUB

Have recently acquired a Tug, minus Engine & Gearbox. It was orgianlly fitted with the Ford 10hp Sidevalve Engine (E93W Series)

Not the Ford 100E series - but the old Ford 'Sit up & Beg' type.

Can anyone help - or have a source for spares.

Hope you help

Thanks Tom G

Hello Tom is this the same sort of engine used in the Bean Motor Hoe? Good luck with the project

Regards, Lewis

LandyMan75 at 03:25PM on Dec 10, 2009

Hello Tom is this the same sort of engine used in the Bean Motor Hoe? Good luck with the project

Regards, Lewis

Lewis

Many thanks for the info. Will keep searching to see if I can find a suitable unit

Regards

Tom G

Sorry if I'm completely in the wrong ball park, not sure if this is a 100E engine or not, but I spotted this on eBay: http://cgi.ebay.co.uk/1950s-ford-10-horse-power-engine-gearbox_W0QQitemZ110467719695QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item19b863a20f

Regards, Lewis

Lewis

Thanks for this, and yes I did spot it - but £300.00 is far too much for this unit (it's pre 100E), and do now have a few 'irons in the fire' . Do please let me know is you do see anything else though. Regards Tom G

I know where there are two Ford 10 engines and a gearbox. I am looking for a 100E engine and box and got quite excited when I found these 1172 engines until I discovered they were not 100Es. Contact me and I can put you in touch with the guy who has them near Crewe.

David

David Wood at April 6, 2011 at 7:44 AM

I know where there are two Ford 10 engines and a gearbox. I am looking for a 100E engine and box and got quite excited when I found these 1172 engines until I discovered they were not 100Es. Contact me and I can put you in touch with the guy who has them near Crewe.

David

David

Thanks for the info, however have managed to acquire a suitable 10hp engine/gearbox (E80W). The 100E is indeed 1172cc and is the larger engine, so not quite the same.

Thanks however for the thought.

Tom G

Tom Gilvear at November 12, 2009 at 4:22 PM

Have recently acquired a Tug, minus Engine & Gearbox. It was orgianlly fitted with the Ford 10hp Sidevalve Engine (E93W Series)

 

Not the Ford 100E series - but the old Ford 'Sit up & Beg' type.

 

Can anyone help - or have a source for spares.

 

Hope you help

 

Thanks Tom G

Hi Tom do you remember me from Isleworth depot. Best regards John.